Pictured Above
HT-70, BQ-460 & SL-40
|
Features
|
|
The Standard Horizon HT-70 is an in-line or off-line three-knife trimmer that produces precise, clean cuts with no rough edges. The LCD display console steps the operator through set-up and changeover, and provides continuous updates on system status. The HT-70 will accept a variable lift size up to 2" thick. Changeovers are accomplished in under 10 minutes, without the need for any tools, and all adjustments are external to the knife area for added safety. An advanced interlock system provides enhanced operator safety. |
|
Specifications
|
|||
| Cutter Knife Motion | Mechanical Diagnol Cut | Trimming Accuracy | Within 0.5 mm (0.02") |
|
Max.
Untrimmed Size
|
330 x 330 mm (12.9" x 12.9") | Knife Material | Tungsten Carbide |
| Max. Trimmed Size | 300" x 300" mm (11.8" x 11.8") | Power | 200 V 50/60 Hz, 3-Phase |
| Min. Trimmed Size | 100 x 142 mm (4" x 5.6") | 220 /240 V, 50/60 Hz, 3-Phase | |
| (T: Portrait Y: Landscape) | Irregular Sizes | Power Consumption | 3kw |
| Lift | 50.8 mm (2') (Max Pile height for a batch of trimming) | Machine Weight | 1,530 kg ( 3,374 lb) |
| Mechanical Speed | 1,000 cycles/hr (A4T) | Machine Dimension | 2,260 (W) x 1,160 (D) x 1,600 (H) mm |
| Clamping System | Hydraulically Operated | (89" x 45.7" x 63") | |
| Clamping Pressure | Steplessly variable adjustment within the range from 150 to 1,000 kg | Heater | 2.4kw x 1 |
home |manufacturers |supplies| new equipment| used_equipment | service |locations | contact us
© 2002 Standard Graphics Mid-Atlantic, Inc.